Artificial Photosynthesis Lab

Edri Lab @ Department of Chemical Engineering, BGU

Chloride inclusion and hole transport material doping to improve methyl ammonium lead bromide perovskite-based high open-circuit voltage solar cells

Eran Edri, Saar Kirmayer, Michael Kulbak, Gary Hodes, David Cahen

Low-cost solar cells with high VOC, relatively small (E G - qVOC), and high qVOC/EG ratio, where EG is the absorber band gap, are long sought after, especially for use in tandem cells or other systems with spectral splitting. We report a significant improvement in CH3NH3PbBr3-based cells, using CH3NH3PbBr3-xClx, with EG = 2.3 eV, as the absorber in a mesoporous p-i-n device configuration. By p-doping an organic hole transport material with a deep HOMO level and wide band gap to reduce recombination, the cell's VOC increased to 1.5 V, a 0.2 V increase from our earlier results with the pristine Br analogue with an identical band gap. At the same time, in the most efficient devices, the current density increased from ∼1 to ∼4 mA/cm2.

Publication language English
Pages 429-433
Journal Journal of Physical Chemistry Letters
Volume 5
Issue number 3
Publication status Published - 06.02.2014

Keywords

high open-circuit voltage
organic-inorganic lead halide perovskite
solar cell

ASJC Scopus subject areas

General Materials Science
Physical and Theoretical Chemistry
Access to Document
10.1021/jz402706q
Other files and links
Link to publication in Scopus