Mordechai Perl home page

Scientific Publications


Theses
Refereed jurnal articles
Publised proceeding
Reports
 


THESES

 
  1. "Stress Waves in Elastic Cylindrical Shells," M.Sc. Thesis, Technion, Israel Institute of Technology, Faculty of Aeronautical Engineering, Haifa, November, 1970.


     
  2. "Dynamic Crack Propagation Analysis by a Numerical Method," D.Sc. Thesis, Technion, Faculty of Aeronautical Engineering, Haifa, June, 1979.

 
 
 

REFEREED JOURNAL ARTICLES
 
 

 
  1. Ziv, M. and Perl, M., "Impulsive Deformation of Mirsky-Hermann's Thick Cylindrical Shells by a Numerical Method," in Trans. of ASME, Journal of Applied Mechanics, 40, 1973, pp. 1009-1016.


     
  2. Shmuely, M., Peretz, D. and Perl, M. "Effect of Rayleigh Waves in Dynamic Crack Propagation," International Journal of Fracture, 14, 1978, pp. R69-R72.


     
  3. Shmuely, M. and Perl, M. "A Semi-Moving Grid Based Finite Difference Scheme (the SMF2D Code) for Proper Simulation of Crack Propagation," International Journal of Fracture, 14, 1978, pp. R205-208.


     
  4. Shmuely, M. and Perl, M. "The SMF2D Code for Proper Simulation of Crack Propagation," Crack Arrest Methodology and Applications, ASTM STP 711, 1980, pp. 54-69.


     
  5. Perl, M., Shmuely, M. and Betser, A. A., "On the Dynamic Propagation of a Griffith Crack in Finite Rectangular Plate," Engineering Fracture Mechanics, 14, 1981, pp. 143-153.


     
  6. Perl, M. "On the Practical Application of the Infinite Body Effect in Dynamic Fracture Mechanics," Engineering Fracture Mechanics, 15, 1-2, 1981, pp. 237-242.


     
  7. Emery, A. F., Perl, M., Kobayashi, A. S. and Love, W. J., "The Use of the Split Ring in Modeling Ductile Axial Crack Extension in Pipes," Trans. of the ASME, Journal of Pressure Vessel Technology, 103, 2, 1981, pp. 151-154.


     
  8. Awaji, H., Kobayashi, A. S., Emery, A. F., Perl, M. and Kistler, B. L., "Further Numerical Studies on Dynamic Circumferential Crack Propagation in a Large Pipe," Trans. of the ASME, Journal of Pressure Vessel Technology, 103, 2, 1981, pp. 200-201.


     
  9. Emery, A. F., Perl, M., Kobayashi, A. S., and Love, W. J., "On the Motion of an Axial Through Crack in a Pipe," Trans. of the ASME, Journal of Pressure Vessel Technology, 103, 3, 1981, pp. 281-286.


     
  10. Emery, A. F., Kobayashi, A. S., Love, W. J., Perl, M. and Kistler, B. L., "Dynamic Circumferential Ductile Crack Motion in Finite Length Pipes with Various End Conditions," invited paper to SMIRT VI, 1981, paper F7/9*.


     
  11. Perl, M., "An Elastodynamic Analysis of the Single Edge Notch Specimen," Israel Journal of Technology, 20, 1982, pp. 259-267.


     
  12. Perl, M., "Rapid Crack Propagation and Arrest in the DCB Specimen - an Improved Numerical Analysis," International Journal for Numerical Methods in Engineering, 18, 1982,  pp. 1719-1732.


     
  13. Perl, M. Shmuely, M. and Peretz, D., "An Improved Dynamic Crack Propagation Simulation in the SEN Specimen by the SMF2D Code," International Journal of Fracture, 19, 1982, pp. 17-27


     
  14. Nishioka, T., Perl, M. and Atluri, S. N., "An Analysis of Dynamic Fracture in an Impact Test Specimen," Trans. of the ASME, Journal of Pressure Vessel Technology, 105, 1983, pp. 124-131.


     
  15. Perl, M., Uzan, J. and Sides, A., "A Visco-Elasto-Plastic Constitutive Law for a Bituminous Mixture Under Repeated Loading," Transportation Research Record 911, 1983, pp. 20-27.


     
  16. Sides, A.,  Perl, M. and Uzan, J., "The Effect of an Inclusion or a Hole on an Approaching Crack in the Three-Point Bend Specimen," Engineering Fracture Mechanics, 20, 1, 1984, pp. 83-92.


     
  17. Perl, M., "An Elastodynamic Fracture Analysis in a Centre-Cracked Plate," Journal of Materials Science, 20, 1985, pp. 1514-1520.


     
  18. Sides, A., Uzan, J. and Perl, M., "A Comprehensive Visco-Elastoplastic Characterization of Sand-Asphalt Under Compression and Tension Cyclic Loading," ASTM Journal of Testing and Evaluation, 13, 1985, pp. 49-59.


     
  19. Uzan, J., Sides, A. and Perl, M. "A Visco-Elastoplastic Model for Predicting Performance of Asphaltic Mixtures, Transportation Research Record 1043, 1985, pp. 78-89.


     
  20. Perl, M., Sides, A. and Uzan, J., "Numerical Simulation of Fatigue Creep Crack Growth in a Visco-Elastoplastic Material," Part I - "The Numerical Model," Engineering Fracture Mechanics, 23, 2, 1986, pp. 321-331.


     
  21. Uzan, J., Perl, M. and Sides, A. "Numerical Simulation of Fatigue Creep Crack Growth in a Visco-Elastoplastic Material," Part II - "Experimental Validation and Application," Engineering Fracture Mechanics, 23, 2, 1986, pp. 333-344.


     
  22. Levy, C. and Perl, M. "Kinking of a Crack Emanating from the Free Surface of a Beam under  Pure Bending," International Journal of Solids and Structures, 22, 12, 1986, pp. 1525-1539.


     
  23. Perl, M. and Ore, E., "Effect of Geometry and Poisson Ratio on Stress Intensity Factors in the SEN Specimen under Fixed-Grip Conditions," Engineering Fracture Mechanics, 23, 5, 1986, pp. 843-849.


     
  24. Perl, M., Horowitz, A. and Sideman, S., "A Comprehensive Model for the Simulation of the Left Ventricle Mechanics," Part I - "Model Description and Simulation Procedure," Medical & Biological Engineering & Computing, 24, 1986, pp. 145-149.


     
  25. Horowitz, A., Perl, M., Ritman, E. L. and Sideman, S., "A Comprehensive Model for the Simulation of the Left Ventricle Mechanics," Part II - "Implementation and Results Analysis," Medical & Biological Engineering & Computing, 24, 1986, pp. 150-156.


     
  26. Perl, M. and Aroné, R., "Stress Intensity Factors for Large Arrays of Radial Cracks in Thick-Walled Steel Cylinders," Engineering Fracture Mechanics, 25, 3, 1986, pp. 341-348.


     
  27. Perl, M. and Horowitz, A., "Mechanical Model for the Simulation of Ischemia and Infarction of the Left Ventricle," Medical & Biological Engineering & Computing, 25, 1987, pp. 284-288.


     
  28. Aroné, R. and Perl, M., "Stress Intensity Factors for a Pressurized Thick-Walled Cylinder with Radial Cracks of Unequal Length,"  International Journal of Fracture, 34, 4, 1987, pp. R75 - R78.


     
  29. Levy, C. and Perl, M., "Controlled Fracture in a Finite Geometry Body as a Stone Shaping Tool,"   Engineering  Fracture  Mechanics,  29, 3, 1988,  pp. 263-274.


     
  30. Perl, M., "The Temperature Field for Simulating Partial Autofrettage in an Elasto-Plastic Thick-Walled Cylinder," Trans. of the ASME, Journal of Pressure Vessel Technology, 110, 1988, pp. 100-102.


     
  31. Horowitz, A., Sheinman, I., Lanir Y., Perl, M. and Seidman, S., "Nonlinear Incompressible  Finite Element for Simulating Loading of Cardiac Tissue; Part I - Two Dimensional Formulation for Thin Myocardial Strips," Trans. of the ASME Journal of Biomechanical Engineering, 110, 1988, pp. 57-61.


     
  32. Perl, M. and Aroné, R., "Stress Intensity Factors for a Radially Multicracked Partially-Autofrettaged Pressurized Thick-Walled Cylinder,"  Trans. of the ASME, Journal of Pressure Vessel Technology, 110, 1988, pp. 147 - 154.


     
  33. Horowitz, A., Lanir, Y., Yin, F. C. P., Perl, M., Sheinman, I. and Strumpf, R. S. , Structural Three Dimensional Constitutive Law for the Passive Myocardium," Trans. of ASME, Journal of Biomechanical Engineering, 110, 1988, pp. 200-207.


     
  34. Aroné, R. and Perl, M., "Influence of Autofrettage on the Stress Intensity Factors for a Thick-Walled Cylinder with Radial Cracks of Unequal Length," International Journal of Fracture, 39, 1989, pp. R29-R34.


     
  35. Sondak, E., Perl, M. and Pnueli, D., "The Dynamic Response to Impact Loading of a Fluid - Supported Rectangular Plate ," Trans. of the ASME, Journal of Vibration Acoustics Stress and Reliability in Design, 111, 1989, pp. 423-429.


     
  36. Gordon, K. R., Perl, M. and Levy, C., "Structural Plasticity and Breaking Strength of Mouse Femora Exposed to Three Conditions of Loading," Bone, 10, 1989, pp. 303-312.


     
  37. Perl, M. and Levinsohn, J.A., "Measurement of the Actual Fracture Toughness of a Maraging-300 Pressurized Cylinder Using the Vessel as the Test Specimen," Engineering Fracture Mechanics, 34, 2, 1989, pp. 525-530.


     
  38. Sides, A., Perl, M. and Uzan, J., "The Effect of a Disturbance and its Location on the Stress Intensity Factor in the Three-Point Bend Specimen," Engineering Fracture Mechanics, 36, 3, 1990, pp. 365-371.


     
  39. Perl, M., Wu, K. H. and Aroné, R., "Uniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels," Part I - "Stress Intensity Factors Evaluation," Trans. of the ASME, Journal of Pressure Vessel Technology, 112, 4, 1990, pp. 340-345.


     
  40. Wu, K. H., Perl, M. and Aroné, R., "Uniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels," Part II - "The Inter-Crack Stress Field," Trans. of the ASME, Journal of Pressure Vessel Technology, 112, 4, 1990, pp. 346-352.


     
  41. Ben-Zvi, R., Libai, A. and Perl, M., "A Curved Axisymmetric Shell Element for Nonlinear Dynamic Elastoplastic Problems," Part I - "Formulation," International Journal of Computers and Structures, 42, 4, 1992, pp. 631-639.


     
  42. Ben-Zvi, R., Perl, M., and Libai, A., "A Curved Axisymmetric Shell Element for Nonlinear Dynamic Elastoplastic Problems," Part II - "Implementation and Results," International Journal of Computers and Structures, 42, 4, 1992, pp. 641-648.


     
  43. Perl, M. and Ashkenazi, A., "Radial Cracking of a Thick-Walled Cylinder due to an Internal Thermal Shock," Engineering Fracture Mechanics, 41, 4, 1992, pp. 597-605.


     
  44. Perl, M. and Ashkenazi, A., "A More Realistic Thermal Shock Analysis of a Radially Multicracked Thick-Walled Cylinder," Engineering Fracture Mechanics, 42, 5, 1992, pp. 747-756.


     
  45. Perl, M., "Stress Intensity Factor Approximate Formulae for Uniform Crack Arrays in Pressurized or Autofrettaged Cylinders," Engineering Fracture Mechanics, 43, 5, 1992, pp. 725-732.


     
  46. Gordon, K. R., Levy, C., Perl, M. and Weeks, O. I., "Adaptive Modeling in a Mamalian Skeletal Model System,"  Growth Development and Ageing, 57, 1993, pp. 101-110.


     
  47. Horowitz, A., Perl, M. and Sideman, S., "Geodesics as a Mechanically Optimal Fiber Geometry for the Left Ventricle," Basic Research in Cardiology, 88, Suppl. 2, 1993, pp. 67-74.


     
  48. Gordon, K. R., Levy, C., Perl, M. and Weeks, O. I.,  "Experimental Perturbation of the Development of Sexual Size Dimorphism in the Mouse Skeleton," Growth Development and Ageing, 58, 1994, pp. 95-104.


     
  49. Perl, M. and Aroné, R., "An Axisymmetric Stress Release Method for Evaluating Autofrettage Level in Thick-Walled Cylinders, Part I - Basic Concept and Numerical Simulation," Trans. of the ASME, Journal of Pressure Vessel Technology, 116, 4, 1994, pp. 384-388.


     
  50. Perl, M. and Aroné, R., "An Axisymmetric Stress Release Method for Evaluating Autofrettage Level in Thick-Walled Cylinders, Part II - Experimental Validation," Trans. of the ASME, Journal of Pressure Vessel Technology, 116, 4, 1994, pp. 389-395.


     
  51. Perl, M., Levy, C. and Pierola, J., "Three-Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder, Part I - Radial Crack Arrays," Trans. of The ASME, Journal of Pressure Vessel Technology, 118, 3, 1996, pp. 357-363.


     
  52. Levy, C., Perl, M. and Kokkavessis, N., "Three-Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder, Part II - Longitudinal Coplanar Crack Arrays," Trans. of The ASME, Journal of Pressure Vessel Technology, 118, 3, 1996, pp. 364-368.


     
  53. Perl, M., Levy, C. and Wang, J., "Interaction Effects in Combined Arrays of Radial and Longitudinal Semi-Elliptical Surface Cracks in Pressurized Thick-Walled Cylinders," Trans. of The ASME, Journal of Pressure Vessel Technology, 119,2, 1997, pp.167-174.


     
  54. Perl, M. and Alperowitz, D., "The Effect of Crack Length Unevenness on Stress Intensity Factors due to Autofrettage in Thick-Walled Cylinders," Trans. of The ASME, Journal of Pressure Vessel Technology, 119, 3, 1997, pp.274-278.


     
  55. Levy, C., Perl, M. and Gordon, K. R., "Geometrical, Mechanical and Structural Adaptation of Mouse Femora Exposed to Different Loadings," ASCE ,Journal of Engineering Mechanics, 124, 2, 1998, pp.217-222.


     
  56. Perl, M., An Improved Split-Ring Method for Measuring the Level of Autofrettage in Thick-Walled Cylinders, Trans. of The ASME, Journal of Pressure Vessel Technology 120, 1, 1998, pp. 69-73.


     
  57. Levy, C. , Perl, M., and Fang, H., "Cracks Emanating from an Erosion in a Pressurized Autofrettaged Thick-Walled Cylinder-Part I: Semi-Circular and Arc Erosions," Trans. of the ASME, Journal of Pressure Vessel Technology, 120, 4, 1998, pp. 349-353.


     
  58. Perl, M., Levy, C., and Fang, H., "Cracks Emanating from an Erosion in a Pressurized Autofrettaged Thick-Walled Cylinder-Part II: Erosion Depth and Ellipticity Effects," Trans. of the ASME, Journal of Pressure Vessel Technology, 120, 4, 1998, pp. 354-358.


     
  59. Perl, M. and Greenberg, Y., "Three Dimensional Analysis of Thermal Shock Effect on Inner Semi-Elliptical Surface Cracks in a Cylindrical Pressure Vessel, International Journal of Fracture, 99,3,1999, pp. 161-170.


     
  60. Perl, M., Levy, C., and Bu, J., "Three Dimensional Analysis of a Semi-Elliptical Crack Emanating from an Erosion at the Bore of an Autofrettaged Pressurized Cylinder," Trans. of the ASME, Journal of Pressure Vessel Technology, 121, 2, 1999, pp. 209-215.


     
  61. Perl, M.,"The Change in Overstrain Level Resulting from Machining of an Autofrettaged Thick-Walled Cylinder," Trans. of the ASME, Journal of Pressure Vessel Technology, 122, 1, 2000, pp. 9-14.


     
  62. Perl, M., and Nachum., A., "3-D Stress Intensity Factors for Internal Cracks in an Over- Strained Cylindrical Pressure Vessel Part I-The Effect of Autofrettage Level," Trans. of the ASME, Journal of Pressure Vessel Technology, 122, 4, 2000, pp. 421-426.


     
  63. Perl, M., and Nachum. A., "3-D Stress Intensity Factors for Internal Cracks in an Over- Strained Cylindrical Pressure Vessel Part II-The Combined Effect of Pressure and Autofrettage," Trans. of the ASME, Journal of Pressure Vessel Technology, 123, 1, 2001, pp. 135-138.


     
  64. Perl, M., Levy, C., and Ma, Q., "The Influence of Multiple Axial Erosions on the Fatigue Life of Autofrettaged Pressurized Cylinders," Trans. of the ASME, Journal of Pressure Vessel Technology, 123, 3, 2001, pp. 293-297.


     
  65. Levy, C., Perl, M., and Ma, Q., "The Influence of Multiple Axial Erosions on a Three Dimensional Crack in Determining the Fatigue Life of Autofrettaged Pressurized Cylinders," Trans. of the ASME, Journal of Pressure Vessel Technology, 124, 1, 2002, pp. 1-6.


     
  66. Levy, C., Perl, M., and Ma, Q., Erosions and their Effect on the Fatigue Life of Thick Walled Autofrettaged Pressurized Vessels," Trans. of the ASME, Journal of Pressure Vessel Technology, 125, 3, 2003, pp. 242-247.

 
 
 

 PUBLISHED PROCEEDINGS
 

 
  1. Ziv, M. and Perl, M. "Impulsive Deformation of Mirsky-Herrmann's Thick Cylindrical Shells by a Numerical Method," Applied Mechanics Western Conference, Stanford Research Institute, Menlo Park, California, September 1973, Paper No. 73-APMW-10.


     
  2. Shmuely, M., Peretz, D. and Perl, M., "Effect of Rayleigh Waves on Dynamic Fracture Mechanics," The 12th Israel Conference on Mechanical Engineering, Haifa, July 1978, Paper No. 2.2.


     
  3. Shmuely, M. and Perl, M., "The SMF2D Code for Proper Simulation of Crack Propagation," ASTM Symposium on Crack Arrest Methodology and Applications, Philadelphia 1978, STP 711, 1980, pp. 54-69.


     
  4. Perl, M. and Peretz, D., "An Improved Dynamic Crack Propagation Simulation in the SEN Specimen by the SMF2D Code," Collection of Papers of the 21st Israel Annual Conference on Aviation and Astronautics, Haifa, February 1979, p. 182.


     
  5. Perl, M., Shmuely, M. and Betser, A. A., "On the Dynamic Propagation of a Griffith Crack in a Finite Rectangular Plate," The 13th Israel Conference on Mechanical Engineering, Haifa, July 1979, p. 77.


     
  6. Perl, M., "An Improved Dynamic Analysis of an Initiating and Fast-Running Griffith Crack in a Finite Rectangular Plate," The Second International Conference on Numerical Methods in Fracture Mechanics, Swansea, July 1980, pp. 509-523.


     
  7. Emery, A. F., Perl, M., Love, W. J. and Kobayashi, A. S., "On the Motion of an Axial Through Crack in a Pipe," The ASME Century-2 Pressure Vessels and Piping Conference, San Francisco, August 1980, Paper No. 80-C2/ PVP-99.


     
  8. Perl, M., "An Improved Dynamic Numerical Analysis of Crack Initiation Fast Crack Propagation and Crack Arrest in the DCB Specimen," The ASME Century-2 Aerospace Conference, San Francisco, August 1980, Emerging Technologies in Aerospace Structures, Design, Structural Dynamics and Materials, ed. J. R. Vinson, pp. 273-284.


     
  9. Awaji, H., Kobayashi, A. S., Emery, A. F., Love, W. J., Perl, M., and Kistler, B. L., "Further Numerical Studies on Dynamic Circumferential Crack Propagation in a Large Pipe,"  ASME Winter Annual Meeting, Chicago, November 1980, Paper No. 80-WA/PVP-6.


     
  10. Emery, A. F., Perl, M., Kobayashi, A. S. and Love, W. J., "Ductile Axial Crack Extension in Pipes," ASME Winter Annual Meeting, Chicago, November 1980, Paper No. 80-WA/PVP-5.


     
  11. Perl, M., "Dynamic Crack Propagation Analysis of the SEN Specimen by a Numerical Method," ASME Winter Annual Meeting, Chicago, November 1980, Paper No. 80-WA/PVP-2.


     
  12. Perl, M., Emery, A. F., Kobayashi, A. S. and Love, W. J., "Dynamic Crack Propagation in Very Ductile Materials - The Influence of Inertia," ASME Winter Annual Meeting, Chicago, November 1980, Paper No. 80-WA/PVP-8.


     
  13. Perl, M., "An Improved Algorithm for Simulating Dynamic Crack Propagation Processes in Various Specimen Configurations," The Fifth International Conference on Fracture, Cannes, France, March 1981, Paper No. 604.


     
  14. Nishioka, T., Perl, M. and Atluri, S. N., "An Analysis of, and Some Observations on Dynamic Fracture in An Impact Test Specimen," ASME Joint Conference of the Pressure Vessels and Piping, Materials, Nuclear Engineering and Solar Division, Denver, June 1981, Paper No. 81-PVP-18.


     
  15. Emery, A. F., Kobayashi, A. S., Love, W. J., Perl, M. and Kistler, B. L., "Dynamic Circumferential Ductile Crack Motion in Finite Length Pipes with Various End Conditions," The Sixth International Conference on Structural Mechanics in Reactor Technology, Paris, August 1981, Paper No. F7/9*.


     
  16. Perl, M., Uzan, J. and Sides, A., "Visco-Elasto-Plastic Constitutive Law for a Bituminous Mixture Under Repeated Loading," Transportation Research Board 62nd Annual Meeting, Washington, DC, January 1983, Transportation Research Record 911, pp. 20-27.


     
  17. Uzan, J., Perl, M. and Sides, A., "The Influence of an Inclusion or a Hole on the Bending of a Cracked Beam," Collection of Papers, the 25th Israel Annual Conference on Aviation and Astronautics, Tel Aviv, July 1983, pp. 267-268.


     
  18. Sondak, E., Pnueli, D. and Perl, M., "The Dynamic Response of a Rectangular Plate Impulsively Loaded Interacting with an Acoustic Fluid," The 17th Israel Conference on Mechanical Engineering, Tel Aviv, July 1983, Paper No. 6.1C.


     
  19. Sides, A., Uzan, J. and Perl, M., "An Approximate Evaluation of Fatigue-Creep Crack Growth in an Elasto-Viscoplastic Three Point Bend Specimen," The 17th Israel Conference on Mechanical Engineering, Tel Aviv, July 1983, Paper No. 4.1C.


     
  20. Perl, M. and Horowitz, A., "Material and Structural Limitations in a 3-D Finite Element Model of the Left Ventricle," Proceedings of the International Henry Goldberg Workshop on 3-D Simulation and Imaging of the Cardiac System, Haifa, March 1984, pp. 117-130.


     
  21. Uzan, J., Perl, M. and Sides, A., "Visco-Elasto-Plastic Model for Predicting Asphaltic Mixture Performance," Transportation Research Board 64th Annual Meeting, Washington, DC, January 1985, Transportation Research Record, 1043, 1985, pp. 78-89.


     
  22. Ben-Zvi, R., Libai, A. and Perl, M., "Curved Thin Shell Element for Nonlinear Axisymmetric or Plane Dynamic Problems," Collection of Papers the 27th Israel Annual Conference on Aviation and Astronautics, Haifa, February 1985, pp. 97-98.


     
  23. Perl, M., Horowitz, A. and Sideman, S., "A Comprehensive Model for the Simulation of the Left Ventricle Mechanics," Proceedings of the Second International Henry Goldberg Workshop on Simulation and Control of the Cardiac System, Vol. 1, Haifa, April 1985, pp. 67-77.


     
  24. Horowitz, A., Perl, M. and Sideman, S., "An Improved Model for the Mechanical Simulation of the Entire Cardiac Cycle," Proceedings of the XIV International Conference on Medical and  Biological Engineering and the VII International Conference on Medical Physics, Espoo, August 1985, pp. 659-660.


     
  25. Levy, C., Perl, M. and  Yarnitzky,  Y., "Controlled Crack Propagation for Stone Cutting," Proceeding of the International Conference and Exposition on Fatigue Corrosion Cracking Fracture Mechanics and Failure Analysis, Salt Lake City, December 1985, pp. 359-363.


     
  26. Perl, M. and Aroné, R., "Stress Intensity Factor for Large Arrays of Radial Cracks in Thick-Walled Steel Cylinders," The Third Israel Materials Engineering Conference, Haifa, December 1985, Paper 7.4.2.


     
  27. Horowitz, A., Lanir, Y. and Perl, M., "A Three Dimensional Constitutive Law for the Passive Myocardium Based on a Microstructural Approach," Proceedings of the Third Henry Goldberg Workshop on Simulation and Modeling of the Cardiac System - from Cellular  Activation to Muscular Activity, Rutgers University, Pascataway, New Jersey, March 1986, pp. 299-312.


     
  28. Perl, M. and Horowitz, A., "Simulation of the Mechanics of an Infarcted Left Ventricle," Proceedings of the Third Henry Goldberg Workshop on Simulation and Modeling of the Cardiac System - from Cellular Activation to Muscular Activity, Rutgers University, Pascataway, New Jersey, March 1986, pp. 463-477.


     
  29. Perl, M. and Aroné, R., "The Influence of Residual Stresses on the Stress Intensity Factors  of Internal Cracks in Thick-Walled Cylinders," the Twentieth Israel Conference on Mechanical Engineering, Tel Aviv, June 1986, Paper 8.1.2.


     
  30. Horowitz, A. and Perl, M., "Mechanical and Functional Effects of Ischemic States in the Left Ventricle," IEEE Engineering in Medicine and Biology Society, 8th Annual Conference, Dallas-Fort Worth, November 1986, Vol. 1, pp. 48-50.


     
  31. Horowitz, A., Lanir, Y., Perl, M., Yin, F. C. P., Strumpf, R., Zeger, S. and Chew, P., "A Three Dimensional Constitutive Law for Passive Myocardium," ASME Winter Annual Meeting, Anaheim, December 1986, Paper No. 86-WE/BO-1B5.


     
  32. Wu, K. H., Perl, M. and Aroné, R., "Stress Intensity Factors for Large Arrays of Unequal Radial Cracks in Thick-Walled Pressurized Cylinders," ASME Winter Annual Meeting, Boston, Massachusetts, November 1987, 87-WA/PVP.


     
  33. Perl, M., Levy, C. and Gordon, K. R.,  "Changes in Geometrical and Mechanical Properties Found in Mice Femora Due to Increased Applied Mechanical Loadings," Seventh University of California, Davis, Biomedical Engineering Symposium, Davis, California, April 1989.


     
  34. Perl, M., Wu, K. H. and Aroné, R., "Uniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels, Part I - Stress Intensity Factors Evaluation," ASME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 1989, PVP-Vol. 163, pp. 129-134.


     
  35. Wu, K. H., Perl, M. and Aroné, R., Uniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels, Part II - The Inter-Crack Stress ," ASME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 1989, PVP-Vol. 163, pp. 135-141.


     
  36. Levy, C., Gordon, K. R. and Perl, M., "Geometrical and Mechanical Changes in Mice Femora Due to Increased Loading," Twenty-First Midwestern Mechanics Conference, Houghton, Michigan, August 1989, Vol. 15, pp. 177-178.


     
  37. Levy, C., Gordon, K. R. and Perl, M., "Factors Influencing Load Carrying Capacity of Mice Femora Due to Exercise," Eighth Annual Southern Biomedical Engineering Conference, Richmond, Virginia, October 1989, pp. 109-111.


     
  38. Perl, M. and Ashkenazi, A., "Radial Cracking of a Thick-Walled Cylinder due to an Internal Thermal Shock," The Fifth Israel Materials Engineering Conference, Haifa, December 1990.


     
  39. Levinsohn, J. A. and Perl, M., "Evaluation of the Actual Fracture Toughness of a Maraging 300 Pressurized Cylinder Using the Vessel as the Test Specimen," The 24th Israel Conference on Mechanical Engineering, Haifa, May 1992, Paper 2.3.1.


     
  40. Levy, C., Perl, M. and Gordon, K. R., "Geometrical, Mechanical and Structural Adaptation of Mouse Femora Exposed to Different Loadings," Proceedings of the Eleventh Annual Southern Biomedical Engineering Conference, Memphis, Tennessee, October 1992, pp. 85-88.


     
  41. Perl, M. and Alperowitz, D., "The Effect of Crack Length Unevenness on Stress Intensity Factors Due to Autofrettage in Thick-Walled Cylinders," Proceedings of the Twenty-Fifth Israel Conference on Mechanical Engineering, Haifa, May 1994, pp. 315-318.


     
  42. Perl, M., Levy, C. and Pierola J., "Three Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder: Part I - Radial Crack Arrays," the Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 1995, Current Topics in Computational Mechanics, J. F. Cory, Jr. and J. L. Gordon, eds., PVP-Vol. 305, pp. 347-355.


     
  43. Levy, C., Kokkavessis, N., and Perl, M., "Three Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder: Part II - Longitudinal Coplanar Crack Arrays," the Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 1995, Current Topics in Computational Mechanics, J.  F. Cory, Jr. and J.  L. Gordon, eds., PVP-Vol. 305, pp. 373-378.


     
  44. Perl, M., and Greenberg, Y., "Thermal Shock Effect on Three Dimensional Internal  Radial Surface Cracks in a Cylindrical Pressure Vessel," Proceedings of the Twenty-Sixth Israel Conference on Mechanical Engineering, Haifa, May 1996, pp. 473-476.


     
  45. Perl, M., Levy, C., and Wang, J., "Interaction Effects in Combined Arrays of Radial and Longitudinal Semi-Elliptic Surface Cracks in Pressurized Thick-Walled Cylinder, "the ASME Pressure Vessels and Piping Conference, Montreal, Canada, July 1996, Pressure Vessels and Piping Codes and Standards Vol. 1, T. C. Esselman ed. PVP-Vol. 338,pp. 247-255.


     
  46. Perl, M., and Greenberg, Y. Three Dimensional Analysis of Thermal Shock Effect on Inner Semi-Elliptical Surface Cracks in a Cylindrical Pressure Vessel , The ASME Pressure Vessels and Piping Conference, Orlando, Florida, July 1997, High Pressure Technology,  L. Antalffy ed. PVP-Vol. 344 pp. 100-105.


     
  47. Levy, C., Perl, M., and Fang, H. Erosion Geometry Effects on The Stress Intensity Factors of a Crack Emanating from the Erosion in an Autofrettaged Pressurized Thick-Walled Cylinder, the ASME Pressure Vessels and Piping Conference, Orlando, Florida, July 1997, Current Topics in The Design and Analysis of Pressure Vessels and Piping,   D. K. Williams ed. PVP-Vol. 354 pp. 139-145.


     
  48. Perl, M., and Nachum, A., The Combined Effect of Autofrettage and Pressure on Semi-Elliptical Surface Cracks in a Cylindrical Vessel, Proceedings of the First Israel-France Bi-National Workshop on Failure of Materials, Kyriat Anavim, May 1998, pp. 91-97.


     
  49. Perl, M., and Nachum, A., "3-D Stress Intensity Factors Resulting from Autofrettage for Semi-Elliptical Radial Inner Cracks in a Pressurized Cylinder ,Proceedings of the Twenty-Seventh Israel Conference on Mechanical Engineering, Haifa, May 1998, pp. 181-183.


     
  50. Levy, C., Perl, M., and Bu, J. Three Dimensional Erosion Geometry Effects on the Stress Intensity Factors of an Inner Crack Emanating from an Erosion in an Autofrettaged Pressurized Cylinder , the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, California, July 1998, Finite Element Applications: Linear, Non-Linear, Optimization and Fracture, J. F. Cory, J. L. Gordon and Y. Narita eds. PVP-Vol. 370 pp.11-17.


     
  51. Perl, M., and Nachum, A., The Effect of Autofrettage on 3-D Internal Radial Surface Cracks in a Pressurized Cylinder , the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, California, July 1998,  High Pressure Technology, L. Piqueur, M. Kawahara and J. Kapp eds., PVP-Vol. 371, pp. 37-43.


     
  52. Perl, M., Fatigue and Fracture of Autofrettaged Cylindrical Pressure Vessels, Proceedings of the   International Conference on Materials Science & Engineering BRAMAT 99, Brasov, Romania, February 1999, Vol-III - Heat Treatment and Plastic Manufecturing  pp. 53-60.


     
  53. Perl, M., The Change in Overstrain Level Resulting from Machining of an Autofrettaged Thick-Walled Cylinder, the ASME Pressure Vessels and Piping Conference, Boston, Massachusetts, August 1999,High Pressure Technology,   E. D. Roll ed. PVP-Vol. 384 pp. 83-90.


     
  54. Levy, C., Perl, M., and Ma Q. The Influence of Multiple Axial Erosions on the Fatigue Life of Autofrettaged Pressurized Cylinders, the ASME Pressure Vessels and Piping Conference, Boston, Massachusetts, August 1999,Computer Technology, G.M. Hulbert ed. PVP-Vol. 385 pp. 273-278.


     
  55. Tzubery, R., deBotton, G., Zaretzky. E., and Perl, M., "Shock-Wave Propagation in Glass - Fibres Reinforced Epoxy Composites," Proceedings of the Twenty-Eighth Israel Conference on Mechanical Engineering, Beer-Sheva, June 2000, p 404.


     
  56. Perl, M., and Ostraich, B., "3-D Analysis of Uniform Arrays of Unequal-Depth Cracks in a Thick-Walled Pressurized Cylinder," Proceedings of the Twenty-Eighth Israel Conference on Mechanical Engineering, Beer-Sheva, June 2000, p 414.


     
  57. Levy, C., Ma, Q., and Perl, M., "Equispaced Multiple Axial Erosions' Influence on the SIF of a 3-D Crack Emanating from the Most Dangerous Erosion in Autofrettaged Pressurized Cylinders," Proceedings of the Twenty-Eighth Israel Conference on Mechanical Engineering, Beer-Sheva, June 2000, p 415-417.


     
  58. Tzubery, R., deBotton, G., Zaretzky. E., and Perl, M., "Experimental and Numerical Study of the Response of a Woven Glass/Epoxy 7781 Composite on the Planar Impact Loading," Explomet 2000 - International Conference on Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, Albuquerque, New Mexico, June 2000, Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, K. P. Staudhammer, L. E. Murr, and M. A. Meyers, eds, 2001, pp. 135-142, Elsevier Science, Amsterdam.


     
  59. Tzubery, R., deBotton, G., Zaretzky. E., and Perl, M., "The Dynamic Response of a Glass/Epoxy Woven Composite Under a Uni-dimensional Impact - Experimental Results and Numerical Simulation," Euromech- Fourth European Solid Mechanics Conference, Metz, June 2000, pp. 102.


     
  60. Perl, M., and Ostraich, B., Analysis of Uniform Arrays of 3-D Unequal-Depth Cracks in a Thick-Walled Cylindrical Pressure Vessel, the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 2000, High Pressure Technology 2000, S. C. Mordre ed. PVP-Vol. 406 pp. 83-88.


     
  61. Levy, C., Perl, M., and Ma, Q., The Influence of Multiple Axial Erosions on a Three Dimensional Crack in Determining the Fatigue Life of Autofrettaged Pressurized Cylinders," The 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 2000, Emerging Technologies, Risk Assessment, Computational Mechanics and Advanced Engineering Topics, F. L. Cho ed. PVP 400, pp. 55-62.


     
  62. Tziperfal, A., Perl, M., Karp, B., and Haroush, S., Laser Induced Pre-Cracking of Alumina Fracture Toughness Specimens," Abstracts of the First Israel-Japan Bi-National Workshop on Dynamic Response of Brittle Solids, Neve-Ilan, January 2001.


     
  63. deBotton, G., Tzubery, R., Zaretsky, E., and Perl, M., The Dynamic Behaviour of Epoxy Resin and Fiber-Reinforced Epoxy Composite," Abstracts of the First Israel-Japan Bi-National Workshop on Dynamic Response of Brittle Solids, Neve-Ilan, January 2001.


     
  64. Boasson, A., Buchman A., deBotton, G., Perl, M., and. Azoulay, A. "Characterization of Aging and Adhesion Strength by Non-destructive Damping Measurement in Conjunction with Finite Element Simulations," The 24th Annual meeting of the Adhesion Society, Williamsburg, Virginia February 2001, Adhesion Science for the 21st Century, J. A. Emerson ed. pp. 397-399.


     
  65. Perl, M., and Ostraich, B., The Effect of Autofrettage on Uniform Arrays of 3-D Unequal-Depth Cracks in a Thick-Walled Cylindrical Vessel, the 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 2001, High Pressure Technology - 2001 at the Dawn of the New Millennium, L. Antalffy and L. Picqueur eds. PVP-Vol. 418, pp. 31-37.


     
  66. Levy, C., Perl, M., and Ma, Q., The Influence of Finite Three Dimensional Axial Erosion on the Fatigue Life of Partially Autofrettaged Pressurized Cylinders," The 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 2001 Emerging Technologies: Advanced Topics in Computational Mechanics and Risk Assessment, D.R. Metzger ed. PVP 417, pp. 163-168.


     
  67. Ifergane S., Bussiba A., Belker D., Levy I., Kupiec M., Shnek R., and Perl, M., Direct Measurement of Stress Intensity Factor During Subcritical Crack Propagation and Arrest Using Laser Technology," Proceedings of The 21st Conference of the Nuclear Societies in Israel, Haifa, Israel, May 2002.


     
  68. Levy, C., Perl, M., and Ma, Q., The Influence of Finite Three Dimensional Multiple Axial Erosions on the Fatigue Life of Partially Autofrettaged Pressurized Cylinders," The 2002 ASME Pressure Vessels and Piping Conference, Vancouver, BC, Canada, August 2002, High Pressure Technology - 2002: Design, Analysis, Applications, and History, R. D. Dixon ed. PVP 436, pp. 19-25.


     
  69. Levy, C., Perl, M., and Ma, Q., Erosions and their Effect on the Fatigue Life of Thick Walled Autofrettaged Pressurized Vessels," Proceedings of the Gun Tubes 2002 Conference, Oxford, England, September 2002, paper S4P22.


     
  70. Perl, M. and Ostraich, B.,"The Combined Effect of Pressure and Autofrettage on Uniform Arrays of 3-D Unequal-Depth Cracks in a Thick-Walled Cylinder, Proceedings of the Twenty-Ninth Israel Conference on Mechanical Engineering, Haifa, May 2003, paper 2-4.


     
  71. Perl, M. and Ostraich, B.,"The Favorable Effect of Autofrettage on Uniform Arrays of 3-D Unequal-Depth Cracks in a Thick-Walled Cylindrical Pressure Vessel, The 2003 ASME Pressure Vessels and Piping Conference, Vancouver, Cleveland, Ohio, July 2003, High Pressure Technology - 2003: Shaping High Pressure Technology for the Future, T. Peters ed. PVP 455, pp. 35-42.

 
 

 REPORTS
 

 
  1. "Stress Waves in Elastic Cylindrical Shells," TAE Report 121, Faculty of Aeronautical Engineering, Technion, Haifa, November 1970, with M. Ziv.


     
  2. Several classified scientific and technical reports submitted to the Israel Defence Forces and Israel Military Industry.


     
  3. "An Analysis of, and Some Observations on Dynamic Fracture in an Impact Test Specimen," Office of Naval Research , NR-064-610, with T. Nishioka and S. N. Atluri.


     
  4. "Three Dimensional Cavity Flow and Pressure Distribution in the Left Ventricle," Report No. 121, Julius Silver Institute of Biomedical Engineering, with A. Horowitz, S. Sideman and B. D Spalding.


     
  5. "A Comprehensive Model for the Simulation of the Left Ventricle Mechanics Part I - Description and Simulation Procedure," Report No. 133A, Julius Silver Institute of Biomedical Engineering, with A. Horowitz and S. Sideman.


     
  6. "A Comprehensive Model for the Simulation of the Left Ventricle Mechanics Part II - Implementation and Results Analysis," Report No. 133B, Julius Silver Institute of Biomedical Engineering, with A. Horowitz, E. Ritman and S. Sideman.


     
  7. "Reliability of a Cylinder with Cracks," Israel Institute of Metals, March 1984, with R. Aroné, O. Botstein and B. Shpigler.


     
  8. "Strength and Reliability of Gun Barrels," Israel Institute of Metals, March 1985, with R. Aroné, O. Botstein, B. Shpigler and Y. Oshrat.


     
  9. "Autofrettage and Its Stability," Israel Institute of Metals, March 1986, with R. Aroné, B. Shpigler, O. Hervin and Y. Oshrat.


     
  10. "A Curved Axisymmetric Shell Element for Nonlinear Dynamic Elastoplastic Problems, Part I - Formulation," TAE Report 639, Faculty of Aerospace Engineering, Technion, Haifa, May 1989, with R. Ben-Zvi and A. Libai.


     
  11. "A Curved Axisymmetric Shell Element for Nonlinear Dynamic Elastoplastic Problems, Part II - Implementation and Results," TAE Report 640, Faculty of Aerospace Engineering, Technion, Haifa, May 1989, with R. Ben-Zvi and A. Libai.


     
  12. "Fracture Toughness for Materials of Low Ductility," Israel Atomic Energy Commission, Nuclear Research Center - Negev, Report N-97/505, May 1998, with S. Barzilay and B. Karp.

 
 
 
 

Return to :