Our atom chipOur First Atom Chip
Full size image

The Atom Chip Lab
at
Ben-Gurion University

BEC transition Our BEC
Full size image



Carbon Nano-Tube Wire

Regular atom chips use gold for the wires that create the magnetic fields for the trap. These wires have many advantages, such as relatively high current density and easy and reliable fabrication. When the atoms are brought close to the wire, and the atom chip surface, some of the disadvantages start to appear.

For example, the fabrication of the wires is not perfect, hence, the wires are not perfectly smooth - they have some roughness at the edges. This roughness creates currents in different directions, which in turn create some corrugations in the atomic potential - instead of being smooth, the potential has hills and valleys. The atoms can "feel" the magnetic corrugations and they will behave accordingly, the atomic cloud will separate into different fragments.

Another disadvantage of the gold wires is the Johnson noise. This noise is created by the thermal energy of the electrons in the gold wire itself, regardless to the current in the wire. The fluctuating electrons create fluctuating magnetic fields which couple the magnetically trapped atoms to an un-trapped state. This coupling is expressed as atom loss and it is strengthen as the atoms are brought closer to the wire till at about 1µm height the atoms can not be trapped.

For these disadvantages the carbon nano-tube (CNT) should give an answer. It has many disadvantages on it's own, but it can give rise to new area of research. The main limitations of creating an atomic trap with a CNT are the random growth of the CNTs themselves and the limited absolute current (even though the current density is very high).

On the advantages side are the facts that there is no Johnson noise and that the current is smooth - no corrugations in the potential, hence the atoms can be trapped closer than 1µm from the CNT and the surface. At this distance the attractive Casimir-Polder force is important and it alters the atomic potential drastically.

The above imply that the atoms can be used to measure the Casimir-Polder force, or to measure atom-CNT interaction.

In this study, which has been published (see Papers, "Trapping cold atoms using surface-grown carbon nanotubes"), we check the possibility of trapping an atomic cloud with a "Z"-shaped trap where the center of the "Z" is made of a single layer CNT.

Below is shown a schematic representation of the two-layer CNT (left) and an atomic force microscope (AFM) image of a CNT fabricated and contacted for use as a "Z"-shaped wire trap for atom chip experiments (right). The CNT is marked with two arrows, and the macroscopic object are the Pd contacts.

CNT atom chip schematic design
Full size image
Atomic force microscope (AFM) image of a CNT
Full size image

The atomic potential at the center of the atom chip is plotted on the image below (left), for three different trap positions. The total potential is the sum of the magnetic potential created by the current in the CNT and external fields, the gravity and the Casimir-Polder which bends all the curves to - as they approach the surface. On the right, the barriers to the gravity and to the surface (CP) are plotted against the trap bottom position, together with the number of atoms each trap can hold.

CNT atom chip schematic design
Full size image
Atomic force microscope (AFM) image of a CNT
Full size image